ACQ 1030 - Woodlands Generators

Standby:Continuous running at variable load for duration of an emergency. No overload is permitted on these ratings. In accordance with ISO 3046, BS 5514.

Prime:Continuous running at variable load for unlimited periods with 10% overload available for 1 hour in any 12 hour period.Contact us for the other running periods. In accordance with ISO 8528, ISO 3046, BS 5514. Power ratings based on a 40 C (104 F) ambient temperature reference.

DESIGN SPECIFICATIONS

High quality, reliable and complate power unit
Compact design
Easy start and maintenance possibility
Every generating set is subjected to a comprehensive test programme which includes full load testing and checking and providing of all control and safety shut down functions testing
Full engineered with a wide range of options and accessories:Canopy,soundproof and on road trailer

STANDARD GENSET SPECIFICATIONS

ENGINE:

CUMMINS heavy duty diesel engine
Four cycle, water cooled, turbo charged and after cooled
Electronic Governor Control System
Direct injection fuel system
Replaceable wet type cylinder liners
4 valves per cylinder
24 V D.C. starter and charge alternator
Replaceable fuel filter ,oil filter and dry element air filter
Cooling radiator and fan
Starter battery(with lead acid) including Rack and Cables
Flexible fuel connection hoses and manual oil sump drain pump
Industrial capacity exhaust silencer and steel bellows
Jacket water heater (at automatic models)
Operation manuals and circuit diagram documents

ALTERNATOR:

Brushless, single bearing system, 4 poles
Insulation class H
Standard degree of protection IP21 or IP23
Self-exciting and self-regulating
Stator winding with 2/3 pitch
Impregnation with tropicalised epoxy varnish
Solid state Automatic Voltage Regulator

CHASSIS:

The complete genset is mounted as whole on a heavy-duty fabricated, steel base frame. Antivibration pads are fixed between the engine/ alternator feet and the base frame.
Base frame design incorporates an integral fuel tank.
The generating set can be lifted or carefully pushed / pulled by the base frame
Lifting eyes allow easy transportation by a crain

CANOPY:

30' Container (except ACQ 881)
Sandwich mineral wool attennuation
Large lockable doors
Acustic baffles for the air inlet and outlet
Steel internal floor
Residential silencer
White paint finishing (RAL 9010)
2000 litres fuel tank with retention bund

QUALITY STANDARDS:

The equipment meets the following standards: ISO 3046, VDE 0530, BS 4999, BS 5000, EN 60034-I, IEC 34. The generating set is manufactured by a full accredited NQA-ISO 9001.

WARRANTY:

12 months warranty from commissioning date as standard.

CONTROL SYSTEM:

Control, supervision and protection panel is mounted on the genset base frame.The control panel is equipped as follows;
Control Modules Common Features
Automatic controls generating set, start and shutdown
Front panel programming of the module settings
Remote communication via RS 232 port or RS 485 "modbus" output.
Scrolling digital LCD display
Event logging of shutdown alarms
Control Modules Common Features
Generator Volts(F-F/F-N)
Generator Amperes(L1,L2,L3)
Generator Frequency (Hz)
Generator kVA
Generator kW
Generator Cos j
Engine Temperature (Cantigrade & Fahrenheit)
Engine Speed RPM
Engine hours run
Plant attery volts
XCommon Alarms
Under / over generator volts
Under / over generator frequency
Over current
Low oil pressure
High engine temperature
Under / over speed
Low coolantlevel
Fail to start
Fail to stop
Emergency stop
Charge fail
Low / High battery volts
Auto Mains Failure Control System P2020
Control with DSE model 5220
Static battery charger
Emergency stop push button
Additional Features
Monitoring AC mains supply
Provides signal to change over switch gear
Easy push button control
Stop / Reset-Auto-Manual-Test-Start
Additional Metering
Mains volts (F-F / F-N)
Mains frequency (Hz)
Additional Alarms
Under / over mains volts
Under / over mains frequency
Can data fail
Can ECU fail
Auto Start Control System P2010
Control with DSE model 5210 module
Emergency stop push button
Additional Features
Provides signal to load transfer
Easy pushbutton control
Stop / Reset-Auto-Manual-Test-Start