230/400 V - 50 Hz

Generating Set Model

AC 350

Power
Pf. 0,8

Standby kVA

350

Prime kVA

316

Standby:Continuous running at variable load for duration of an emergency. No overload is permitted on these ratings. In accordance with ISO 3046, BS 5514.

Prime:Continuous running at variable load for unlimited periods with 10% overload available for 1 hour in any 12 hour period. In accordance with ISO 8528,BS 5514. Contact us for the other running periods.Power ratings based on a 40 °C ambient temperature reference.

DESIGN SPECIFICATIONS

• High quality, reliable and complete power unit
• Compact design
• Easy start and maintenance possibility
• Every generating set is subjected to a comprehensive test programme which includes full load testing and checking and providing of all control and safety shut down functions testing
• Full engineered with a wide range of options and accessories:Canopy,soundproof canopy and mobile units

STANDARD GENSET SPECIFICATIONS

ENGINE:

• CUMMINS heavy duty diesel engine
• Four cycle, water cooled, turbo charged
• Electronic Governor Control System
• Direct injection fuel system
• 24 Vdc starter and charge alternator
• 4 Valves per cylinder (Except AC 250)
• Replaceable wet type cylinder liners
• Replaceable fuel filters, oil filters and dry element air filters
• Cooling radiator and fan
• Starter battery(with lead acid) including Rack and Cables
• Flexible fuel connection hoses and manual sump oil drain valve
• Industrial capacity exhaust silencer and steel bellow
• Jacket water heater (at automatic models)
• Operation manuals and circuit diagram documents

ALTERNATOR:

• Brushless,single bearing system,4 poles
• Insulation class H
• Standard degree of protection IP21
• Self-exciting and self-regulating
• Stator winding with 2/3 pitch for improved harmonics
• Impregnation with tropicalised epoxy varnish
• Solid state Automatic Voltage Regulator

CHASSIS:

• The complete generating set is mounted as whole on a heavy-duty fabricated, steel base frame.
• Antivibration pads are fixed between the engine/ alternator feet and the base frame.
• Base frame design incorporates an integral fuel tank.
• The generating set can be lifted or carefully pushed / pulled by the base frame
• Dial type fuel gauge and drain bung on the fuel tank

CANOPY:

• All canopy parts are designed with modular principles
• Without welding assembly
• All metal canopy parts are painted by electrostatic polyester powder paint
• Exhaust silencer is protected against environment influences
• Thermally insulated engine exhaust system
• Emergency stop push button is installed outside of canopy
• Easy lifting and moving
• Easy mainteneance and operation

QUALITY STANDARDS:

• The equipment meets the following standards: ISO 3046, VDE 0530, BS 4999, BS 5000, EN 60034-I, IEC 34. The generating set is manufactured by a full accredited NQA-ISO 9001.

WARRANTY:

• 12 months warranty from commissioning date as standard.

CONTROL SYSTEM:

• Control, supervision and protection panel is mounted on the genset base frame.The control panel is equipped as follows;
• Control Modules Common Features
• Automatic controls generating set, start and shutdown
• Front panel programming of the module settings
• Remote communication via RS232 port or RS 485 "modbus" output
• Scrolling digital LCD display
• Event logging of shutdown alarms
• Control Metering via LCD display
• Generator Volts(F-F/F-N)
• Generator Amperes(L1,L2,L3)
• Generator Frequency (Hz)
• Generator kVA
• Generator kW
• Generator Cosø
• Engine oil pressure (PSI&Bar)
• Engine Temperature (Cantigrade & Fahrenheit)
• Engine Speed RPM
• Engine hours run
• Plant battery volts
• Common Alarms
• Under / over generator volts
• Under / over generator frequency
• Over current
• Low oil pressure
• High engine temperature
• Under / over speed
• Low coolantlevel
• Fail to start
• Fail to stop
• Emergency stop
• Charge fail
• Low / High battery volts
• 1- Auto Mains Failure Control System P2020
• Control with DSE model 5220
• Static battery charger
• Emergency stop push button
• Additional Features
• Monitoring AC mains supply
• Provides signal to change over switch gear
• Easy pushbutton control
• Stop / Reset-Auto-Manual-Test-Start
• Additional Metering
• Mains volts (F-F / F-N)
• Mains frequency (Hz)
• Additional Alarms
• Under / over mains volts
• Under / over mains frequency
• Can data fail
• Can ECU fail
• Auto Start Control System P2010
• Control with DSE model 5010 module
• Emergency stop push button
• Additional Features
• Provides signal to load transfer
• Easy pushbutton control
• Stop / Reset-Auto-Manual-Test-Start